Using a Rubber Cleaner or Rejuvenator

Using a Rubber Cleaner or Rejuvenator

When using a Rubber Cleaner or Rejuvenator for cleaning scanner rollers, it is recommended to wipe the roller and surrounding area where the cleaner was applied. Use a soft cloth, warm water and mild soap over the cleaned area. Then wipe dry with a clean cloth. This will help prevent residues from and cleaner accelerating the following described conditions.
When the surface of roller is initially exposed to solvents or similar chemicals, it swells and softens the roller or rubber surface. In addition this could cause (sometimes desired) the pores on the roller or surrounding plastic area to open. Some Plasticizers* may be removed from the rollers or plastic during cleaning, which cause them to harden and become brittle. This can occur either immediately or over a period of time. All plastics used in general office equipment are susceptible to this condition, some more than others.

This statement does not necessarily promote the use of such cleaners, only cautions the user to their effects.

*Plasticizers are additives that give plastics flexibility and durability.